Leader LV7600 RASTERIZER

• Video analysis functionSupport Various types of video signals, in addition to a variety of displays such as video signal waveform displays, vector display, picture display, 5 BAR display, the CIE chromaticity diagram and CINELITE II, video signal quality (QoE) frozen frame error, black frame error gamut error detection, etc. are equipped as standard features .
• Audio analysis functionThe audio signal embedded in SDI signals can be displayed on a 8ch level meter.16ch level meter,Lissajous, surround and status can be displayed by adding LV7600-SER03.
• SDI signal data analysis functionThe status display has an error detection function of CRC and embedded audio. It also has an event log, data dump, phase difference measurement functions, and can analyze SDI signals.
• Screen capture functionA screen capture function to capture the display screen as still image data and a frame capture function to capture 16 frames of data are equipped. A frame capture function to capture 16 frames of the SDI signals is equipped. There are two methods; one is to import them manually and another is to take them automatically when an error occurs.* Only one frame is captured when an error occurs.
• Frame capture viewer (free Windows software)Search for data captured by the frame capture function, error search, and export to CSV are possible.
• Time code displayThe time code superimposed on SDI signals and can be displayed. The time code can also be used as the timestamp of the event log.
• Input/output terminalSDI input 4 BNC connectorsSDI output 4 BNC connectors (main unit standard equipment)Re-clocked Output signal The re-clocked output of input SDI signal is available on the respective SDI output terminal.
• Closed caption display functionCEA-608, CEA-708 closed caption, Teletext, OP47 subtitle superimposed on SDI signal can be decoded and displayed.
• CIE chart display functionThis is a chromaticity diagram display function corresponding to colorimetry ITU-R BT. 601, ITU-R BT. 709, ITU-RBT. 2020.The display mode corresponds to CIE 1931 (xy display) and CIE 1976 (u’v’ display). Since the CIE chart display function can display two color gamuts, the function can be used to suppress the color gamut of BT.709 using the equipment compatible with BT.2020, and to confirm the content that exceeds the color gamut of BT.709.In color display, the chromaticity point is displayed using the color (on the picture) in the video signal. The chromaticity point can be measured at the point with the cursor.
• Eye pattern display（ LV5600-SER02A)The eye pattern waveform, jitter waveform of SDI signal, and the measurement result of each parameter can be displayed.Only BNC input 1 supports eye pattern display.

• Audio analysisLissajous display, surround display, mute, clip error detection, loudness measurement, etc. are now available. Various analysis displays are also possible, and simultaneously display of 16 channels from one SDI signal or 4 channels from 4 SDI signals is possible.
• Embedded AudioApproved standard

  12G、6G、3G、HD、HD(DL)　*1	SMPTE ST 299
  SD	SMPTE ST 272
  Sampling Frequency	48kHz / 24bit / L-PCM
  Quantization	24bit
  Format	L-PCM / Dolby-E / Dolby Digital / Dolby Digital Plus *2
  Clock Generation	Generated from the video clock.
  Synchronization	Must be synchronized to the video clock.
  	All SDI signals must be synchronized
  Channel Separation	Separates up to four groups (16 channels) from an SDI input.(For 3G, channels 1 to 16 and channels 17 to 32 are divided.)

  *1 Support for 12G and 6G by adding LV7600-SER28 and SER29.*2 Dolby function requires LV7600-SER04 option.

• External input audio

  Approved standard	AES-3id
  Synchronization condition	All external input audios are synchronized with each other.

• Digital audio input/output Terminal

  Input/output terminal	DIN 1.0/2.3 connector
  Number of Inputs/outputs	Group A 4 terminals 8chGroup B 4 terminals 8ch
  Switching input/output	Switching by each group terminals 8 ch

• It corresponds to the IP signal and the video signal of the 2K video format at SMPTE ST 2022-6 (non-compression) and SMPTE 2110-20 (non-compression). LV7600-SER06 is ready for 10G/25G IP inputs.The IP transmission standards conform to SMPTE ST 2022-6/7 and SMPTE ST 2110-20/30/40, and SMPTE ST 2110 streams can also decode 4K(3840×2160) streams.* To support 4K, LV7600-SER28 is required.
• Video analysis functionVarious types of video signals, in addition to a variety of displays such as video signal waveform displays, vector display, picture display, 5 BAR display, the CIE chromaticity diagram and CINELITEII, video signal quality (QoE) frozen frame error, black frame error, gamut error detection, etc. are equipped as standard features.
• Audio analysis functionThe audio signals superimposed on IP signals can be displayed on a level meter.16ch level meter,Lissajous, surround and status can be displayed by adding LV5600-SER03.
• Transmission quality analysis functionTogether with monitoring transmission errors such as packet loss, check sum error, packet discontinuity, the transmission quality (QoS) monitoring function such as packet jitter, which was difficult to observe by using IP, are strengthened.
• Capture functionA screen capture function to capture the display screen as still image data is equipped. It also has a frame capture function and can capture one frame of an active video period.
• Time code displayThe time code superimposed on IP signals and can be displayed.The time code can also be used as the timestamp of the event log.
• Redundancy SystemThe apparatus support the redundancy system of SMPTE ST 2022-7 and enable checks of the signal switching display seamlessly.
• Packet Jitter MeasurementThe apparatus measures the arrival intervals of IP stream packets and graphically display temporary fluctuations.
• IP Packet Status DisplayThe apparatus displays information, including source addresses, destination addresses, and protocols for the IP packets. They display traffic of 10G/25G Ethernet graphically, as well.
• PTP Packet Status DisplayThe apparatus graphically displays PTP time information and network delay information.
• Conversion Output of SDI from IPThe apparatuses converts video signals that are input in the form of IP stream into SDI and output the converted signals.
• Packet CaptureThe apparatus captures the received IP packets and save them in the USB memory device in the form of PCAP files.
• Packet Header AnalysisThe apparatus displays the packet header information of selected streams.
• Display of Delay for Each PortThe apparatus displays delays in the stream conforming to SMPTE ST 2022-7 for each input port.
• Redundancy measurementDisplay packet jitter and PTP measurement port 1 and 2 at the same time.
• Logging by PTP timestampLogging error by PTP timestampTime Display by PTP time.
• PTP information display.Display PTP Grand Master from PTP announce message.
• Add payload ID when IP convert to SDISDI output with Payload ID when IP convert to SDI.* ST2110 only
• CSV file copy of Graph dataCan be copied graph data of packet jitter and PTP and other by CSV file.
• Audio ANC packet jitter displaySupport packet jitter graph display for Audio and ANC.* ST2110 only
• Buffer measurementMeasure CMAX and VRX value of standardized SMPTE 2110-21*LV7600-SER06/ST2110 only
• Support IP format

  Standard	SMPTE ST 2022-6，SMPTE ST 2110-20
  Redundancy standard	SMPTE ST 2022-7
  Synchronized standard	PTP (SMPTE ST 2059-1/2)
  Support protocol	IPv4 (Internet Protocol version 4)
  	IGMPv2/v3 (Internet Group Management Protocol)
  	NMOS (IS-04/05) via Ethernet

• Input video format

  LV7600-SER05
  Standard	10G SMPTE ST 2022-6，SMPTE ST 2110-20
  Video format	Non compression　1080（60,59.94,50 I/P）、720（60,59.94,50 I/P）、576（50I）、487（59.94I）、（YCbCr4:2:2/10bit）
  LV7600-SER06
  Standard	10G/25G SMPTE ST 2022-6，SMPTE ST 2110-20
  Video format	Non compression　1080（60,59.94,50 I/P）、720（60,59.94,50 I/P）、576（50I）、487（59.94I）、（YCbCr4:2:2/10bit）、4K Non compression YCbCr 4:2:2 10bit 3840×2160 60/59.94/50 /P

• Input Audio format

  Standard	SMPTE ST 2022-6,SMPTE ST 2110-30
  Sampling frequency	48kHz
  Format	L-PCM / Dolby-E / Dolby Digital / Dolby Digital Plus
  Produce clock method	From Video clock.
  Synchronization condition	Synchronized with video
  IP audio 16ch maximum display

  *L-PCM requires LV7600-SER03 option.*Dolby function requires LV7600-SER03 and LV7600-SER04 options.

• Ancillary data

  Support standard

  SMPTE ST 2110-40

• LV7600-SER05Input connector

  Input connector	SFP+
  Port number	2
  Support standard	10G BASE-SR / 10G BASE-LR

• LV7600-SER06Input connector

  Input port	SFP+
  SFP	SFP+ / SFP28
  Port number	2(*)
  Support standard	10G BASE-SR / 10G BASE-LR
  	25G BASE-SR / 25G BASE-LR

  * Signal standard of Port 1 and Port 2 should be same standard.

• Ancillary data

  Support standard

  SMPTE ST 2110-40

• HDR zone display.The luminance distribution of the HDR area can be easily confirmed by coloring the SDR area with monochrome, and the HDR with a color according to the brightness.
• HDR ScaleBy associating WFM and histogram with HDR scale, management of the video with brightness at the time of scene linearity is possible.
• HDR waveform display
• HDR point measurement
  • The crosshairs can be freely moved.
  • Up to 3 points can be measured simultaneously
• Approved standardITU-R BT. 2100 (HLG, PQ), S-Log3, C-Log, Log-CIt corresponds to all except SD input of SDI.

• Output pattern100% color bar, 75% color bar, HD multi format color bar, ARIB 4K multi format color bar (simple format), color raster, cross hatch, 10 steps, limit lamp, Check field, lip sync pattern.
• Scroll

  Direction	8 directions (up and down, left and right, and combinations thereof)
  Speed range	Unit 4 to 124 dots per frame (field), 4 dot unit.
  Moving Box ON/OFFF	Color WHITE, YELLOW, CYAN, GREEN, MAGENTA, RED, BLUE, BLACK　Speed 1 to 3

• Embedded audio

  Number of superimposed channels	maximum 16 ch
  ON/OFF of superimposition	ON/OFF in audio group unit
  Audio level	-20dBFS、-18dBFS、0dBFS、Mute

  *For horizontal 4096/2048 pixel format at frame rates 60, 59.94, 30, and 29.97 Hz, only 8 channels are multiplexed.

• Customizable layout functionVarious items such as video signal waveforms display, vector display waveforms, and images of input signals can be laid out in any position with your user’s preferred size. Multiple input signals up to 4 inputs can be displayed simultaneously, or one input signal can be displayed on multiple screens.
• Display channel Function1 SDI input signals of 1 to 4 input terminals can be allocated to A to D display channels.At this time, by allocating one SDI input signal to multiple display channels, monitoring video signals in multiple display formats is possible.For example, displaying the signal input to SDI input 1 as component video waveform can be displayed on display channel A and the composite video waveform can be displayed on display channel B.* It is not possible to monitor errors in the background of input channels not assigned to display channels.

• Support various formats.Measurement is possible with various SDI formats ranging from 4K to SD.
• Noise Measurement Frequency BandA low-pass filter to select frequency bands is mounted, thereby enabling the removal of high-frequency range components during noise measurements.
• Full Digital ProcessingMeasurements of noise without conversion of analog to digital data obtained from input SDI signals enables high precision, stable measurements.
• Measurement WindowThe Noise Measurement Window can be set in the picture display window. The size and the area of the window can be set in units of pixels or lines. If the video level is not flat as affected by the lens, the area as flat as possible of the measurement window can be selected for the measurement.
• Alarm FunctionAn alarm can be displayed when the noise level exceeds the predetermined threshold value.

• IP Format ReadyTest pattern signal streams conforming to IP format (SMPTE ST 2110-20/30/40) can be generated
• Network SynchronizationVideo and audio test signals can be generated in synchronization with SMPTE ST2059 PTP (Precision Time Protocol).
• Packet ErrorPacket errors can be added to the test signals.(Only ST2110)When packet errors or packet jitter is added to the test signal output of a unit, you cannot decode video, audio and ANC streams in the same unit.(Only PORT 1 is supported)
• Packet JitterPacket jitter can be added to the test signals.(Only ST2110)When packet errors or packet jitter is added to the test signal output of a unit, you cannot decode video, audio and ANC streams in the same unit.(Only PORT1 is supported)
• Lip-sync Pattern outputLip-sync pattern can be selected and output as a test pattern.

* To support 4K, LV7600-SER28 is required.