The LV5350 WAVEFORM MONITOR is compact without sacrificing performance, supporting SDI signals from SD through 12G rates. The LV5350 is a 3U half-rack, short-depth waveform monitor with a built-in 7-inch touch screen display and a full array of buttons and control knobs.The waveform, vector, picture, and audio displays enable simple yet comprehensive measurements and quality control of the widest range of audio and video formats. The status display allows you to assess errors and system stability with both event logs and long-term charts. Audio embedded in SDI signals can be shown on the level, Lissajous, and status displays.
The LV5350 has a DC power input, which enables it to be used in locations where AC power supplies are not available. Additionally, the LV5350 can be battery-operated by installing a battery mount option, ideal for onset work or any location where power is a challenge. With its combination of touch screen, dedicated buttons and knobs, and user-defined screen layouts the LV5350 allows complex measurement and monitoring tasks to be quickly completed.
Supports various signal inputsIt supports SD-SDI, HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI single link, 4K 3G-SDI dual link.
Excellent operabilityThe LV5350 adopts a 7-inch full HD panel with a touch panel function.
Customizable layoutVarious items such as video signal waveforms, vector waveforms, and pictures of input signals can be laid out in any position with your favorite size.
SDI signal generation functionSDI signal generation function can handle from HD-SDI to 12G-SDI.
HDRThe HDR signal level monitoring and the level management at the assumed luminance (Nits) in a display considering OOTF are possible.
Focus AssistWe developed a new focus detection algorithm based on nonlinear super-resolution technology; accordingly the focus with high sensitivity can be detected even with low-contrast images, which were conventionally difficult to detect.
The LR 2490 is a dual rack mount adapter used to install Leader’s 4U half-rack size products in a 19-inch EIA standard rack.
It allows two Leader products to be installed side by side.
The LT4610 is a 1U full rack size sync generator that can operate in synchronization with GPS, PTP, CW, and internal reference signals, as well as Genlock that supports external analog video synchronization signals.It supports analog video sync signals, AES / EBU digital audio output, word clock, and time code, and also supports 3G / HD / SD-SDI output and 12G-SDI output compatible with 4K and 8K.In addition, it supports the PTP grand master function and PTP slave function, and can manage the optimum synchronization system according to the system.The genlock function is equipped with a STAY IN SYNC function that retains the phase when an abnormality occurs in the input analog video synchronization signal, and the power supply unit performs redundant operation, enabling highly reliable system construction.
Genlock FunctionVarious output signals can be synchronized by applying NTSC/PAL black burst signals, which are analog video sync signals, and HDTV tri-level sync signals.NTSC/PAL black burst signal with field reference pulse and NTSC black burst signal with 10 field IDs are also supported.
Stay-in-Sync and Slow Lock FunctionsA Stay-in-Sync function is available in case errors occur at the genlock input. In addition, a slow lock function is available to reduce the shock that occurs when genlock is performed again based on stay-in-sync. This makes it possible to construct an extremely reliable synchronization system.
Analog Video Sync Signal OutputSix analog video sync signals can be output. The phase of each output can be adjusted independently.NTSC/PAL black burst signal with field reference pulse and NTSC black burst signal with 10 field IDs are also supported.
GPS/BDS SynchronizationGNSS antenna can be connected to generate and output signals by locking to the frequency and clock obtained from the GPS or BDS.
PTPPTP synchronization corresponds to the grandmaster and slave functions.You can choose reference signal from PTP, GPS, analog BB or internal.
Time Code I/OThe ATC (LTC) can be embedded in LTC outputs from internal time, GPS, LTC, and VITC time information, and SDI signal outputs, or VITC in analog video synchronous signal outputs.
Triple-rate SDI ReadySDI signal output supports 3G-SDI (level A and level B), HD-SDI (including dual link), and SD-SDI. There are two independent outputs of SDI signal at output terminals. The pattern and phase can be set separately for each. (However, only a single output is available for 3G-SDI level B and HD dual link.)
Lip Sync PatternsThis option can output lip sync patterns in which the video and audio are synchronized. In combination with a waveform monitor that features a lip sync function, such as the Leader’s LV5600, it is possible to measure the offset between the video and audio in SDI signal transmissions.
12G-SDI SupportFour output connectors can be added to support 12G-SDI, 3G-SDI (level A, level B) and HD-SDI (including dual links).In addition, it corresponds to the 8K video signal by adding 8K software option.
Audio EmbeddingThe LT 4610 can embed 32 channels (stream 1, stream 2, 4 channels each × 4 groups) of audio signals for 3G-SDI level B and 16 channels (4 channels × 4 groups) of audio signals for 3G-SDI level A, HD-SDI, and SD-HDI. The frequency, level, and the click can be set for each channel.
AES/EBU Signal OutputThe LT 4610 can output a 48 kHz AES/EBU signal synchronized with the video signals. It is also equipped with a muted AES/EBU signal output.
Word-Clock Signal OutputThe LT 4610 can output a 48 kHz word-clock signal synchronized with video signals.
Real Time ClockThe real time clock is backed up by a battery. There is no need to reset the clock even when the power is turned off and on.
EthernetSNMP is supported. When an error is detected, a TRAP is generated. Further, the LT4610 can be controlled through HTTP.
Preset Memory FunctionUp to 10 presets can be saved. Convenient registered presets can be recalled during operation. The LT 4610 can be started with the same settings every time.
External Memory SupportLogo data and preset data can be written and saved from the front panel using USB memory devices.
Redundant Power SupplyTwo power supplies are built in to provide redundancy. When errors occur in power supply units, alarms are indicated on the LT4610 front panel. Errors can also be output as alarms using SNMP traps.
Web BrowserYou can use ETHERNET to control the instrument from a web browser.
Connector type : 4-pin XLR , female
Power RequirementsInput : 100 to 240 VAC, 50/60 Hz, 1.3 A (AC115V)Output : 12 VDC, 6.67 A max.
Dimensions : 60 (W) × 32 (H) × 145 (D) mm (without cord), Weight 0.45 kg (without cord)
There are no reviews yet.