AJA OG-ROI-SDI openGear 3G-SDI to 3G-SDI/HDMI Scan Converter

• openGear compatible card
• SDI to HDMI/3G-SDI conversion with SDI loop through
• Scan Converter
• 3G-SDI and HDMI 1.4 outputs
• Supports SD, HD, and 3G formats (see Tech Specs for complete list)
• Region of Interest scaling
• Up, down, cross-conversion
• Aspect ratio conversion
• Frame rate conversion
• Image H/V flip and 90 degree rotation
• Conversion between Deinterlaced and Progressive signals
• Accepts input SDI formats up to 1920 x 1080p 60 Hz
• Loss of input management: Black or Mute
• Supports 8-channels of embedded audio
• 2-channel analog audio output of disembedded audio
• Genlock:  Reference Input, SDI Input, or Free Run
• Remote Ethernet configuration through Ross DashBoard software
• Power: 7 watts
• Hot-swappable
• Rear I/O card included
• Two slots required for each card
• Compatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear frames
• Five year warranty

Eliminate extra interface clutter and menu bars and extract only the portion of the computer screen you want.

OG-ROI-SDI is fully compatible with the free Ross DashBoard application, offering interactive selection of a Region of Interest from the incoming computer signal. You have full control over how that region is scaled to the output resolution using AJA’s high quality scaling algorithms for the cleanest picture quality possible. 

Take full control of aspect ratio, image rotation and frame rate conversion with on-screen controls in the DashBoard software that shows you what your source and output will look like, including the formats that are coming in and the choices you have made for the signal going out.

You're able to easily create highly effective and engaging displays by using additional OG-ROI-SDI openGear converters. By utilizing three OG-ROI-SDI openGear converters in the appropriate rackframe you can feed three display monitors side by side, each rotated to portrait mode. By using the SDI pass through of the OG-ROI-SDI, the SDI routed image is in sync, with each OG-ROI-SDI providing the necessary Region of Interest output via SDI. Settings for each of the OG-ROI-SDI openGear converters is provided via ethernet control through an ethernet switch. The result is a visually exciting and creative way to feed display content.

OG-ROI-SDI accepts 2-channel analog audio from the 2x 3-pin terminal blocks connectors or embedded 8-channel audio from an SDI input. The audio source and routing can be selected in the DashBoard software and is embedded into the SDI output. This allows computer audio to be embedded within the SDI signal for easy, synchronized routing.

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

• Video Formats: 270 Mbps - 12 Gbps, format agnostic
• Inputs: 1x 12G-SDI BNC with SDI Loop out
• Outputs: 1x 12G-SDI BNC; 1x Single Mode ST Connector
• Monitor via openGear DashBoard software
• Support for HDR - High Dynamic Range video 
• Input Present and Input SMPTE Lock LEDs
• Automatic detection and reclocking
• 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, 2.970 Gbps, 5.934 Gbps, 5.940 Gbps, 11.868 Gbps, 11.880 Gbps - Auto Select
• Nominal Wavelength; Tx: 1310 nm (typ)
• Power: 3 watts Max
• Hot-swappable
• Appropriate Fiber SFP included
• Rear I/O card included
• Compatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear frames
• Five year warranty

This diagram shows six openGear OG-FiDO-T-12G-ST cards being used in an OG-X-FR rack frame, which highlights the high density capability of the openGear platform. The studio sets each contains a total of six 12G-SDI cameras connected to six OG-FiDO-T-12G-ST cards, which provide the 12G-SDI to fiber ST conversion. Fiber runs are then extended up to 10km to an OB production truck with six OG-FiDO-R-12G-ST cards in an OG-X-FR rack frame. The Production Gallery receives six discrete camera feeds as 12G-SDI via the OG-FiDO-R-12G-ST, driving the gallery video monitors with ultra low latency.

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Eliminate extra interface clutter and menu bars and extract only the portion of the computer screen you want.

OG-ROI-DVI is fully compatible with the free Ross DashBoard application, offering interactive selection of a Region of Interest from the incoming computer signal. You have full control over how that region is scaled to the output resolution using AJA’s high quality scaling algorithms for the cleanest picture quality possible. 

Take full control of aspect ratio, image rotation, and frame rate conversion with on-screen controls in the DashBoard software that shows you exactly what your source and output will look like, including the formats that are coming in and the choices you have made for the signal going out.

OG-ROI-DVI utilizes a direct DVI loop through, allowing it to be placed in-line so you still have a connection to a computer monitor while extracting to SDI. The reference input ensures the SDI signal out of OG-ROI-DVI is locked for use throughout a production or facility.

OG-ROI-DVI accepts 2-channel analog audio from 2x 3-pin terminal blocks connectors. The audio source can be selected in the DashBoard software and is embedded into the SDI output. This allows computer audio to be embedded within the SDI signal for easy, synchronized routing.

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

• Support for 12G/6G/3G-SDI audio embedding to and from the Dante audio ecosystem
• Dual, and independent 12G-SDI Input and Output ports, each supporting 16 audio channels, totaling 64-channels per card in a compact design
• 1x Primary and 1x Secondary GigE ports for Dante network redundancy
• 64-channels of simultaneous SDI/Dante audio bridging per card
• 2x Internal Signal Generators which enables transmitting Dante audio channels over SDI without having an external SDI source signal
• DashBoard support for remote signal status and configuration
• Compatible with a range of Dante software from Audinate including Dante Controller for routing and configuration choices
• High density and small form factor, enabling 10 cards to be utilized in a single openGear frame for up to 640-channels of SDI/Dante audio bridging
• Supported within OG-X-FR and OG-3-FR openGear frames
• Hot swap capable
• Five year warranty

OG-DANTE-12GAM provides the bridge between SDI and Dante ecosystems. 

Watch this video for an introduction on the many benefits and advantages Dante audio over IP offers for embedding and disembedding to and from professional SDI workflows.

Dante audio networking provides digital audio distribution over local and wide area networking with low latency (<1 ms), using standard network hardware or by connecting into a standard network infrastructure. This offers many advantages, including audio system scalability, easier installation, and simplified wiring. 

Dante also allows uncompressed, multi-channel, low latency high-resolution digital audio to be distributed across a switched Ethernet network using standard TCP/IP protocols while meeting the stringent quality requirements of professional audio.

Dante audio is the primary choice for ProAV system integrators and a growing number of broadcasters and is widely adopted by 450 manufacturers offering 2500+ Dante device types.

• Current solutions require many devices, or a very high price to accomplish this bridging. DANTE reduces the amount of gear required to perform this bridging function.
• DANTE audio provides a redundant infrastructure with two networks, a primary and secondary 1 GigE ports, which provide users with a robust system of audio transport.
• DANTE audio solutions also provides a synchronization solution that is not met by other solutions for audio over IP.

OG-DANTE-12GAM bridges between SDI sources and destinations with embedded audio to/from the Dante audio ecosystem.  It's your SDI/Dante Gateway.

• OG-DANTE-12GAM provides two 12G-SDI ports for input and two ports for outputs, providing single cable support of 4K/UltraHD/2K/HD/SD video material and up to 16-channels of embedded audio support per SDI connection. This enables 64-channels of SDI/Dante bridging simultaneously.
• Audio can be bridged, mapped and embedded from Dante sources into each SDI stream or disembedded from SDI and served to Dante destinations using Dante Controller software.
• Redundancy across the Primary and Secondary 1 GigE Ethernet connections in OG-DANTE-12GAM for Dante audio, provides security and peace of mind.
• The openGear format offers high density with up to 10 cards within each openGear frame.
  • This all adds up to 640-channels of audio bridging between SDI and Dante audio in a single rack frame, ideal for flykits, OB vans and facilities.
• The openGear OG-X-FR frame itself supports redundant power supplies, critical for live environments and constant up time.

OG-DANTE-12GAM is your bridge between embedded SDI audio and Dante sources and destinations. With Dante Controller software, you can route sources and destinations wherever required across 1 GigE networks. 

Embed your DAW audio outputs into your video projects for mastering and more. Disembed your SDI program's audio content and deliver across the network to drive mixers, amplifiers and more in live venue contexts. 

The OG-DANTE-12GAM provides two 12G-SDI inputs and two 12G-SDI outputs alongside Gigabit Primary and Secondary Ethernet ports. OG-DANTE-12GAM automatically detects and configures to the SDI input video standard. Simple user controls in Dashboard and Dante Controller allow channel enabling and mapping to and from SDI and DANTE.

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

• openGear compatible card
• Converts between SD, HD, and 3G HD formats
• Supports 1080p50/60
• Controlled by DashBoard network control software and external DIP switch
• 2x 3-Pin Terminal Block connectors (included)
• 16-channel embedded SDI audio input and output
• Reference Input
• Compatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames
• Five year warranty

NOTE:OG-UDC supports 3G-SDI Level A only. 3G-SDI Level B is not supported. OG-UDC passes-through embedded audio ancillary data only.  It does not pass through other types of embedded ancillary data.

AJA's powerful hardware conversion technology ensures the highest image quality for your productions. Key conversion features include:

• SD/HD up/down-conversion
• SD/SD aspect ratio conversion
• HD/HD cross-conversion (720p/1080i)
• Up/down/cross-conversion with both the input and converted formats on SD/HD SDI outputs (both synchronized)

OG-UDC can up or down-convert between SD, HD, and 3G HD (1080p50/60), and cross-convert between HD formats including 3G HD. 

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

• Video Formats: 150 Mbps - 3 Gbps, format agnostic
• Inputs: 1x3G-SDI BNC; 1x Multi-Mode LC Fiber
• Outputs: 1x 3G-SDI BNC; 1xl Multi-Mode LC Fiber
• Monitor via openGear DashBoard
• Input Present and Input SMPTE Lock LEDs
• Automatic detection and reclocking
• 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
• Nominal Wavelength: 850 nm
• Power: 2.5 watts
• Hot swap capable
• Compatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.