Leader Rx Series Advanced Rasterizers for 2K/3G/HD/SD Signal Generation, Analysis & Monitoring

Faster fault diagnosis, ultra-flexible monitoring

Sună pentru preț

(+40) 722 428 874

Adaugă la favorite
Adaugă la favorite
Category:

Ți-a plăcut acest produs? Adaugă-l acum la favorite.

Adaugă la favorite
Adaugă la favorite

Description

Based on the award-winning Sx portable test & measurement range, the rackmounted Rx series of rasterizers delivers advanced 2K/3G/HD/SD signal
generation, analysis and monitoring for faster compliance testing and fault diagnosis of both video and audio signals. Monitoring workflows are optimized with ultra-flexible, user-defined instrument display layouts. Up to 16 instruments can be presented simultaneously, at sizes ranging from full screen down to 1/16 screen. In multi-channel environments, channel identification is simplified with a dedicated window color per channel.

Reviews

There are no reviews yet.

Be the first to review “Leader Rx Series Advanced Rasterizers for 2K/3G/HD/SD Signal Generation, Analysis & Monitoring”

Your email address will not be published. Required fields are marked *

DescriptionRx 500Rx 1000Rx 2000
SD-SDI, HD-SDI as standard●●●
Optional 3G-SDI (license)OOO
Dual 16:9, 24 bit, 4.3” TFT, 480 x 272 pixelsN/AN/A●
OLED display●●N/A
Front panel backlit navigation keypad●●●
Front panel volume/gain control●●●
Front panel headphone connector 6.3mm (1/4 inch) Stereo jack●●●
Front panel USB 2.0 host port type A socket + 2 rear panel USB 2.0 ports●●●
Internal loudspeakerBeeperBeeper2x7W wide range
I/O Module slots (each supporting a range of audio/video modules)244
Internal Dual Dolby® decoder module slot (option)111
HDMI instrument output, 1920 x 1080, 4:4:4 RGB, Type A●●●
SDI instrument output, 1920 x 1080, 4:2:2 YUV, BNC 75 Ohm●●●
Basic SDI generator included as standard (replaces instrument output)●●●
8 channel 48kHz PCM audio on HDMI and SDI Instrument outputs●●●
Reference/VITC input, passive loop through, BNC 75 Ohm compensated●●●
AES input AES 3-ID, SMPTE 276M-1995, 75 Ohm BNC●●●
LTC input (via 26 pin high density ‘D’ Type socket)●●●
ProductRx 500Rx 1000Rx 2000
8x GPI I/O (via 26 pin high density ‘D’ Type socket)●●●
Stereo analog audio output, (via 26 pin high density ‘D’ Type socket)●●●
Calibrated stereo balanced analog audio output (option module)●●●
Ethernet remote control via browser, RJ45 connector, 10/100Base-T●●●
IP sockets based remote control as standard●●●
FPGA firmware/software upgrade via Ethernet/USB●●●
Viewing angle tilt mechanismN/AN/A●
Desktop mounting kit●●N/A
19” Rack-mount kit1U (opt)1U (stnd)2U (stnd)
10.5”/9.5” Rack-mountON/AN/A
Whisper quiet temp controlled fan1 x 40mm internal2 x 40mm external1 x 60mm external
Power consumption (variable on modules inserted)24W typical 40W max24W typical 70W max27W typical 80W max
4 Pin XLR power connector, 12V nominal (9V-18V)●●●
AC Power adaptor (incl), 90-264VAC, 120W●●●
Dimensions (w x h x d) excl ears & projections210x44x 170mm440x44x 170mm440x88x 150mm
Weight (chassis with CPU module and 1x AG option module fitted)1.3kg2.0kg2.3kg
1 year manufacturers warranty●●●

Quick Comparison

SettingsLeader Rx Series Advanced Rasterizers for 2K/3G/HD/SD Signal Generation, Analysis & Monitoring removeLeader LV5350 WAVEFORM MONITOR removeLeader LR2731 RACKMOUNT ADAPTER removeLeader LC 2190 BLANK PANEL removeLeader LC2151 SFP28 MULTI-MODE removeLeader LT 4448 CHANGEOVER remove
NameLeader Rx Series Advanced Rasterizers for 2K/3G/HD/SD Signal Generation, Analysis & Monitoring removeLeader LV5350 WAVEFORM MONITOR removeLeader LR2731 RACKMOUNT ADAPTER removeLeader LC 2190 BLANK PANEL removeLeader LC2151 SFP28 MULTI-MODE removeLeader LT 4448 CHANGEOVER remove
Image
SKU
Rating
Price
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionFaster fault diagnosis, ultra-flexible monitoring
Content
Based on the award-winning Sx portable test & measurement range, the rackmounted Rx series of rasterizers delivers advanced 2K/3G/HD/SD signal generation, analysis and monitoring for faster compliance testing and fault diagnosis of both video and audio signals. Monitoring workflows are optimized with ultra-flexible, user-defined instrument display layouts. Up to 16 instruments can be presented simultaneously, at sizes ranging from full screen down to 1/16 screen. In multi-channel environments, channel identification is simplified with a dedicated window color per channel.

The LV5350 WAVEFORM MONITOR is compact without sacrificing performance, supporting SDI signals from SD through 12G rates. The LV5350 is a 3U half-rack, short-depth waveform monitor with a built-in 7-inch touch screen display and a full array of buttons and control knobs.The waveform, vector, picture, and audio displays enable simple yet comprehensive measurements and quality control of the widest range of audio and video formats. The status display allows you to assess errors and system stability with both event logs and long-term charts. Audio embedded in SDI signals can be shown on the level, Lissajous, and status displays.

The LV5350 has a DC power input, which enables it to be used in locations where AC power supplies are not available. Additionally, the LV5350 can be battery-operated by installing a battery mount option, ideal for onset work or any location where power is a challenge. With its combination of touch screen, dedicated buttons and knobs, and user-defined screen layouts the LV5350 allows complex measurement and monitoring tasks to be quickly completed.

Features

  • Supports various signal inputsIt supports SD-SDI, HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI single link, 4K 3G-SDI dual link.
  • Excellent operabilityThe LV5350 adopts a 7-inch full HD panel with a touch panel function.
  • Customizable layoutVarious items such as video signal waveforms, vector waveforms, and pictures of input signals can be laid out in any position with your favorite size.
  • SDI signal generation functionSDI signal generation function can handle from HD-SDI to 12G-SDI.
  • HDRThe HDR signal level monitoring and the level management at the assumed luminance (Nits) in a display considering OOTF are possible.
  • Focus AssistWe developed a new focus detection algorithm based on nonlinear super-resolution technology; accordingly the focus with high sensitivity can be detected even with low-contrast images, which were conventionally difficult to detect.
MULTI video signal measurement display
SDI status display
Event Log
Phase comparison
Vector variable scale
5BAR Gamut Display
5BAR Gamut Display
5BAR Gamut Display
CINELITE cursor measurement
Cine Light Advance
CINELITE advance vector marker
Cine zone
Cine zone
Cine zone
Cine zone
CINEZONE luminance search function
Audio bar graph display
WEB browser
Mouse operation
Touch panel operation

Rear Panel

The LR2731 is a rack mount adapter used to install a LV7300 rasterizer in a 19-inch EIA standard rack.

Because one side is a blank panel, use it to install a single LV7300.

The LC 2190 is a blank panel for the LR 2490 rack mount adapter.

Use it when installing a single Leader measuring instrument in the LR 2490.

Transmission Distance：Max 300mWave ength：850nmCompliant standards：25GBASE-SRConnector：LCSupported options：LV5600-SER06,LV7600-SER06

The LT 4448 is a changeover unit that automatically switches the signal from the primary signal to the backup signal when problems are detected in the primary signal.Two systems of input signals (primary and backup) are connected to the LT 4448, and the LT 4448 detects errors in the amplitude of the primary input signal.A single LT 4448 provides 11 pairs of BNC and LTC channels. These channels can receive SDI, NTSC/PAL black burst, HD tri-level sync, AES/EBU digital audio, word-clock, and LTC signals.It can be used in combination with the LT 4610/LT 4611/LT 4600A.

Features

  • Provides 11 channels (a single channel consists of a primary input, a backup input, and an output) on a single unit.
  • Relays are used to switch between the primary signals and backup signals of channels 1 and 2. High-speed electronic switches are used to switch between the primary signals and backup signals of channels 3 to 11. For LTC, switching is possible between primary signals and backup signals for three inputs.
  • The input signal type can be selected. On channels 1 and 2, you can select SDI signals (3G, HD, SD), NTSC/PAL black burst signals, or HD3 tri-level sync signals. On channels 3 to 8, you can select NTSC/PAL black burst signals or HD3 tri-level sync signals. Channels 9 and 10 are exclusive to AES/EBU digital audio signals. Channel 11 is exclusive to word-clock signals (TTL input). LTC channels are exclusive to LTC signals (2 Vp-p differential input).
  • LTC channels provide three systems of two inputs (primary and backup) and three systems of one output. In addition, an LTC cable (sold separately) can be used to connect to a LT 4610 (Sync Generator).
  • A delay for starting the fault detection at power up can be set to approximately 1 minute or approximately 4 minutes depending on the rise time of the system signal source that the LT 4448 is connected to.
  • Redundant power supplies are available for increased reliability. Alarms are generated when errors occur.

Combination with two LT 4610s

Combination with two LT 4600As

Rear Panel

WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information