AJA OG-ROI-DVI openGear DVI to 3G-SDI Scan Converter

openGear compatible cardDVI to 3G-SDI conversion with DVI loop throughComputer resolutions to video resolutions Scan ConverterEDID Emulation3G-SDI outputSupports SD, HD, and 3G formats (see Tech Specs for complete list)Region of Interest scalingUp, down, cross-conversionAspect ratio conversionFrame rate conversionImage H/V flip and 90 degree rotationConversion between Deinterlaced and Progressive signalsAccepts input DVI formats up to 1920 x 1200 60 HzLoss of input management: Black or MuteSupports 8-channels of embedded audio2-channels analog audio output of disembedded audio inputs or 2-channel or 8-channel DVI audio (2x 3-Pin Terminal Block connectors included)Genlock: Reference Input, DVI Input, or Free RunRemote Ethernet configuration through Ross DashBoard softwarePower: 8 wattsHot-swappableRear I/O card includedTwo slots required for each cardCompatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear framesFive year warranty

Sună pentru preț

(+40) 722 428 874

Adaugă la favorite
Adaugă la favorite
Category:

Ți-a plăcut acest produs? Adaugă-l acum la favorite.

Adaugă la favorite
Adaugă la favorite

Description

Features

  • openGear compatible card
  • DVI to 3G-SDI conversion with DVI loop through
  • Computer resolutions to video resolutions Scan Converter
  • EDID Emulation
  • 3G-SDI output
  • Supports SD, HD, and 3G formats (see Tech Specs for complete list)
  • Region of Interest scaling
  • Up, down, cross-conversion
  • Aspect ratio conversion
  • Frame rate conversion
  • Image H/V flip and 90 degree rotation
  • Conversion between Deinterlaced and Progressive signals
  • Accepts input DVI formats up to 1920 x 1200 60 Hz
  • Loss of input management: Black or Mute
  • Supports 8-channels of embedded audio
  • 2-channels analog audio output of disembedded audio inputs or 2-channel or 8-channel DVI audio (2x 3-Pin Terminal Block connectors included)
  • Genlock: Reference Input, DVI Input, or Free Run
  • Remote Ethernet configuration through Ross DashBoard software
  • Power: 8 watts
  • Hot-swappable
  • Rear I/O card included
  • Two slots required for each card
  • Compatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear frames
  • Five year warranty

Region of Interest

Eliminate extra interface clutter and menu bars and extract only the portion of the computer screen you want.

OG-ROI-DVI is fully compatible with the free Ross DashBoard application, offering interactive selection of a Region of Interest from the incoming computer signal. You have full control over how that region is scaled to the output resolution using AJA’s high quality scaling algorithms for the cleanest picture quality possible. 

Take full control of aspect ratio, image rotation, and frame rate conversion with on-screen controls in the DashBoard software that shows you exactly what your source and output will look like, including the formats that are coming in and the choices you have made for the signal going out.

Connectivity

OG-ROI-DVI utilizes a direct DVI loop through, allowing it to be placed in-line so you still have a connection to a computer monitor while extracting to SDI. The reference input ensures the SDI signal out of OG-ROI-DVI is locked for use throughout a production or facility.

 

Audio

OG-ROI-DVI accepts 2-channel analog audio from 2x 3-pin terminal blocks connectors. The audio source can be selected in the DashBoard software and is embedded into the SDI output. This allows computer audio to be embedded within the SDI signal for easy, synchronized routing.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Reviews

There are no reviews yet.

Be the first to review “AJA OG-ROI-DVI openGear DVI to 3G-SDI Scan Converter”

Your email address will not be published. Required fields are marked *


Tech Specs


Video Input Formats

  • Computer Signals:
    • WUXGA (1920 x 1200) 60 Hz max
    • VGA (640 x 480) minimum
  • Video Signals:
    • (HD) 1920 x 1080i 50, 59.94
    • (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
    • (HD) 1280 x 720p 50, 59.94, 60
    • (SD) 625i, 525i
    • (SD) 580p, 480p

 

Note: Frame rates limited by the 166 mHz max pixel rate of the DVI receiver.


Video Output Formats

  • (HD) 1920 x 1080p 50, 59.94, 60, SMPTE 425-1 Level A mapping structure 1 (4:2:2 10-bit YCbCr)
  • (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30
  • (HD) 1920 x 1080i 50, 59.94, 60
  • (HD) 1280 x 720p 50, 59.94, 60
  • (SD) 625i 25
  • (SD) 525i 29.97

Color Range

  • Full
  • SMPTE

Reference Source

  • Free Run
  • Card Ext Ref
  • OG Frame Ref 1
  • OG Frame Ref 2

Reference Input

  • Supported reference video inputs include:
    • 1080i tri-level sync
    • 1080p tri-level sync
    • 720p tri-level sync
    • 625i Color Black
    • 525i Color Black
  • 75 ohm terminating 

Video Input

  • 1x DVI input connector (with embedded audio, up to 8-channels)

Video Outputs

  • DVI
    • 1x HDMI loop through connector (with embedded audio, up to 8-channels)
  • SDI
    • 3G-SDI, SMPTE-259/292/424, 1x BNC

Audio Inputs

  • 2-channel balanced analog audio inputs, 2x 3-pin terminal blocks connectors

Audio Output

  • SDI embedded audio, 24-bit, 2-channel or 8-channel

User Interface

  • openGear DashBoard network control software via Windows, macOS or Linux

Size (w x d x h)

  • openGear standard form factor, front slot and rear card. Two slots required for each card

Weight

  • 0.5 lb (0.3 kg)

Power

  • openGear frame compatible, 8.0 watts max per card

Environment

  • Safe Operating Temperature: 0 to 40 C (32 to 104 F)
  • Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: <3,000 meters (<10,000 feet)

Quick Comparison

SettingsAJA OG-ROI-DVI openGear DVI to 3G-SDI Scan Converter removeAJA OG-DANTE-12GAM openGear 12G-SDI/DANTE 64-Channel Embedder/Disembedder removeAJA OG-UDC 3G-SDI Up, Down, Cross-Converter removeAJA OG-FiDO-2T openGear 2-Channel 3G-SDI to Single Mode LC Fiber Transmitter removeAJA OG-FiDO-R openGear 1-Channel Single Mode LC Fiber to 3G-SDI Receiver removeAJA OG-X-FR openGear-compatible 2RU Rackframe remove
NameAJA OG-ROI-DVI openGear DVI to 3G-SDI Scan Converter removeAJA OG-DANTE-12GAM openGear 12G-SDI/DANTE 64-Channel Embedder/Disembedder removeAJA OG-UDC 3G-SDI Up, Down, Cross-Converter removeAJA OG-FiDO-2T openGear 2-Channel 3G-SDI to Single Mode LC Fiber Transmitter removeAJA OG-FiDO-R openGear 1-Channel Single Mode LC Fiber to 3G-SDI Receiver removeAJA OG-X-FR openGear-compatible 2RU Rackframe remove
Image
SKU
Rating
Price
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionopenGear compatible cardDVI to 3G-SDI conversion with DVI loop throughComputer resolutions to video resolutions Scan ConverterEDID Emulation3G-SDI outputSupports SD, HD, and 3G formats (see Tech Specs for complete list)Region of Interest scalingUp, down, cross-conversionAspect ratio conversionFrame rate conversionImage H/V flip and 90 degree rotationConversion between Deinterlaced and Progressive signalsAccepts input DVI formats up to 1920 x 1200 60 HzLoss of input management: Black or MuteSupports 8-channels of embedded audio2-channels analog audio output of disembedded audio inputs or 2-channel or 8-channel DVI audio (2x 3-Pin Terminal Block connectors included)Genlock: Reference Input, DVI Input, or Free RunRemote Ethernet configuration through Ross DashBoard softwarePower: 8 wattsHot-swappableRear I/O card includedTwo slots required for each cardCompatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear framesFive year warrantySupport for 12G/6G/3G-SDI audio embedding to and from the Dante audio ecosystemDual, and independent 12G-SDI Input and Output ports, each supporting 16 audio channels, totaling 64-channels per card in a compact design1x Primary and 1x Secondary GigE ports for Dante network redundancy64-channels of simultaneous SDI/Dante audio bridging per card2x Internal Signal Generators which enables transmitting Dante audio channels over SDI without having an external SDI source signalDashBoard support for remote signal status and configurationCompatible with a range of Dante software from Audinate including Dante Controller for routing and configuration choicesHigh density and small form factor, enabling 10 cards to be utilized in a single openGear frame for up to 640-channels of SDI/Dante audio bridgingSupported within OG-X-FR and OG-3-FR openGear framesHot swap capableFive year warrantyopenGear compatible cardConverts between SD, HD, and 3G HD formatsSupports 1080p50/60Controlled by DashBoard network control software and external DIP switch2x 3-Pin Terminal Block connectors (included)16-channel embedded SDI audio input and outputReference InputCompatible with OG-X-FR, OG-3-FR and DFR-8321 openGear framesFive year warrantyNOTE:OG-UDC supports 3G-SDI Level A only. 3G-SDI Level B is not supported. OG-UDC passes-through embedded audio ancillary data only.  It does not pass through other types of embedded ancillary data.Video Formats: 150 Mbps - 3 Gbps, format agnosticInputs: 2x Independent 3G-SDI Inputs, BNC connectorsOutputs: 2x Independent single mode optical fiber, LC connectorsMonitor via openGear DashBoardInput Present and Input SMPTE Lock LEDsAutomatic detection and re-clocking270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto SelectAll other rates are passed through and not reclockedWavelength: 1310 nmOptical Power: -5dBm (min), 0dBm (max)Power: 2.5 wattsHot-swap capableCompatible with OG-X-FR, OG-3-FR and DFR-8321 openGear framesVideo Formats: 150 Mbps - 3 Gbps, format agnosticInput: 1x Single Mode LC FiberOutputs: 2x 3G-SDI BNC (Mirrored)Monitor via openGear DashBoardInput Present and Input SMPTE Lock LEDsAutomatic detection and reclocking270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto SelectNominal Wavelength: 1260-1620 nmPower: 2.5 wattsHot swap capableCompatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames2RU frame with capacity for up to 20 openGear cards600 watt power supply with integral cooling, optional 2nd power supplyFront LCD display for name, IP address and fault identificationFrameGlow customized identification and alarmingSupport for analog, digital, video, audio, SDI and IP modules in the same frameRemovable front door and air filter for easy fan servicing and maintenanceStandard DashBoard control system for setup, control and monitoringIncludes preinstalled standard network card (MFC-8322-S)
Content

Features

  • openGear compatible card
  • DVI to 3G-SDI conversion with DVI loop through
  • Computer resolutions to video resolutions Scan Converter
  • EDID Emulation
  • 3G-SDI output
  • Supports SD, HD, and 3G formats (see Tech Specs for complete list)
  • Region of Interest scaling
  • Up, down, cross-conversion
  • Aspect ratio conversion
  • Frame rate conversion
  • Image H/V flip and 90 degree rotation
  • Conversion between Deinterlaced and Progressive signals
  • Accepts input DVI formats up to 1920 x 1200 60 Hz
  • Loss of input management: Black or Mute
  • Supports 8-channels of embedded audio
  • 2-channels analog audio output of disembedded audio inputs or 2-channel or 8-channel DVI audio (2x 3-Pin Terminal Block connectors included)
  • Genlock: Reference Input, DVI Input, or Free Run
  • Remote Ethernet configuration through Ross DashBoard software
  • Power: 8 watts
  • Hot-swappable
  • Rear I/O card included
  • Two slots required for each card
  • Compatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear frames
  • Five year warranty

Region of Interest

Eliminate extra interface clutter and menu bars and extract only the portion of the computer screen you want.

OG-ROI-DVI is fully compatible with the free Ross DashBoard application, offering interactive selection of a Region of Interest from the incoming computer signal. You have full control over how that region is scaled to the output resolution using AJA’s high quality scaling algorithms for the cleanest picture quality possible. 

Take full control of aspect ratio, image rotation, and frame rate conversion with on-screen controls in the DashBoard software that shows you exactly what your source and output will look like, including the formats that are coming in and the choices you have made for the signal going out.

Connectivity

OG-ROI-DVI utilizes a direct DVI loop through, allowing it to be placed in-line so you still have a connection to a computer monitor while extracting to SDI. The reference input ensures the SDI signal out of OG-ROI-DVI is locked for use throughout a production or facility.

 

Audio

OG-ROI-DVI accepts 2-channel analog audio from 2x 3-pin terminal blocks connectors. The audio source can be selected in the DashBoard software and is embedded into the SDI output. This allows computer audio to be embedded within the SDI signal for easy, synchronized routing.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features

  • Support for 12G/6G/3G-SDI audio embedding to and from the Dante audio ecosystem
  • Dual, and independent 12G-SDI Input and Output ports, each supporting 16 audio channels, totaling 64-channels per card in a compact design
  • 1x Primary and 1x Secondary GigE ports for Dante network redundancy
  • 64-channels of simultaneous SDI/Dante audio bridging per card
  • 2x Internal Signal Generators which enables transmitting Dante audio channels over SDI without having an external SDI source signal
  • DashBoard support for remote signal status and configuration
  • Compatible with a range of Dante software from Audinate including Dante Controller for routing and configuration choices
  • High density and small form factor, enabling 10 cards to be utilized in a single openGear frame for up to 640-channels of SDI/Dante audio bridging
  • Supported within OG-X-FR and OG-3-FR openGear frames
  • Hot swap capable
  • Five year warranty

OG-DANTE-12GAM Overview Video

OG-DANTE-12GAM provides the bridge between SDI and Dante ecosystems. 

Watch this video for an introduction on the many benefits and advantages Dante audio over IP offers for embedding and disembedding to and from professional SDI workflows.

Dante: The Audio Networking Standard for the Pro AV Industry

Dante audio networking provides digital audio distribution over local and wide area networking with low latency (<1 ms), using standard network hardware or by connecting into a standard network infrastructure. This offers many advantages, including audio system scalability, easier installation, and simplified wiring. 

Dante also allows uncompressed, multi-channel, low latency high-resolution digital audio to be distributed across a switched Ethernet network using standard TCP/IP protocols while meeting the stringent quality requirements of professional audio.

Dante audio is the primary choice for ProAV system integrators and a growing number of broadcasters and is widely adopted by 450 manufacturers offering 2500+ Dante device types.

  • Current solutions require many devices, or a very high price to accomplish this bridging. DANTE reduces the amount of gear required to perform this bridging function.
  • DANTE audio provides a redundant infrastructure with two networks, a primary and secondary 1 GigE ports, which provide users with a robust system of audio transport.
  • DANTE audio solutions also provides a synchronization solution that is not met by other solutions for audio over IP.

Bridge Between SDI/Dante Sources and Destinations

OG-DANTE-12GAM bridges between SDI sources and destinations with embedded audio to/from the Dante audio ecosystem.  It's your SDI/Dante Gateway.

  • OG-DANTE-12GAM provides two 12G-SDI ports for input and two ports for outputs, providing single cable support of 4K/UltraHD/2K/HD/SD video material and up to 16-channels of embedded audio support per SDI connection. This enables 64-channels of SDI/Dante bridging simultaneously.
  • Audio can be bridged, mapped and embedded from Dante sources into each SDI stream or disembedded from SDI and served to Dante destinations using Dante Controller software.
  • Redundancy across the Primary and Secondary 1 GigE Ethernet connections in OG-DANTE-12GAM for Dante audio, provides security and peace of mind.
  • The openGear format offers high density with up to 10 cards within each openGear frame.
    • This all adds up to 640-channels of audio bridging between SDI and Dante audio in a single rack frame, ideal for flykits, OB vans and facilities.
  • The openGear OG-X-FR frame itself supports redundant power supplies, critical for live environments and constant up time.

OG-DANTE-12GAM Workflow

OG-DANTE-12GAM is your bridge between embedded SDI audio and Dante sources and destinations. With Dante Controller software, you can route sources and destinations wherever required across 1 GigE networks. 

Embed your DAW audio outputs into your video projects for mastering and more. Disembed your SDI program's audio content and deliver across the network to drive mixers, amplifiers and more in live venue contexts. 

Connectivity

The OG-DANTE-12GAM provides two 12G-SDI inputs and two 12G-SDI outputs alongside Gigabit Primary and Secondary Ethernet ports. OG-DANTE-12GAM automatically detects and configures to the SDI input video standard. Simple user controls in Dashboard and Dante Controller allow channel enabling and mapping to and from SDI and DANTE.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features

  • openGear compatible card
  • Converts between SD, HD, and 3G HD formats
  • Supports 1080p50/60
  • Controlled by DashBoard network control software and external DIP switch
  • 2x 3-Pin Terminal Block connectors (included)
  • 16-channel embedded SDI audio input and output
  • Reference Input
  • Compatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames
  • Five year warranty

NOTE:OG-UDC supports 3G-SDI Level A only. 3G-SDI Level B is not supported. OG-UDC passes-through embedded audio ancillary data only.  It does not pass through other types of embedded ancillary data.

AJA Hardware Conversion Technology

AJA's powerful hardware conversion technology ensures the highest image quality for your productions. Key conversion features include:

  • SD/HD up/down-conversion
  • SD/SD aspect ratio conversion
  • HD/HD cross-conversion (720p/1080i)
  • Up/down/cross-conversion with both the input and converted formats on SD/HD SDI outputs (both synchronized)

OG-UDC can up or down-convert between SD, HD, and 3G HD (1080p50/60), and cross-convert between HD formats including 3G HD. 

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features:

  • Video Formats: 150 Mbps - 3 Gbps, format agnostic
  • Inputs: 2x Independent 3G-SDI Inputs, BNC connectors
  • Outputs: 2x Independent single mode optical fiber, LC connectors
  • Monitor via openGear DashBoard
  • Input Present and Input SMPTE Lock LEDs
  • Automatic detection and re-clocking
  • 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
  • All other rates are passed through and not reclocked
  • Wavelength: 1310 nm
  • Optical Power: -5dBm (min), 0dBm (max)
  • Power: 2.5 watts
  • Hot-swap capable
  • Compatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames

Connectivity

The 3G-SDI inputs are re-clocked with best-in-class input jitter tolerance. 3G-SDI rates of 270Mb, 1.5Gb, and 3Gb are supported. The fiber connector is attached to the main card for added reliability and cost savings.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features

  • Video Formats: 150 Mbps - 3 Gbps, format agnostic
  • Input: 1x Single Mode LC Fiber
  • Outputs: 2x 3G-SDI BNC (Mirrored)
  • Monitor via openGear DashBoard
  • Input Present and Input SMPTE Lock LEDs
  • Automatic detection and reclocking
  • 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
  • Nominal Wavelength: 1260-1620 nm
  • Power: 2.5 watts
  • Hot swap capable
  • Compatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames

Connectivity

The Fiber input is reclocked with best in class input jitter tolerance. 3G-SDI rates of 270Mb, 1.5Gb, and 3Gb are supported. Supports single mode fiber cable.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features

  • 2RU frame with capacity for up to 20 openGear cards
  • 600 watt power supply with integral cooling, optional 2nd power supply
  • Front LCD display for name, IP address and fault identification
  • FrameGlow customized identification and alarming
  • Support for analog, digital, video, audio, SDI and IP modules in the same frame
  • Removable front door and air filter for easy fan servicing and maintenance
  • Standard DashBoard control system for setup, control and monitoring
  • Includes preinstalled standard network card (MFC-8322-S)

Smart Control

One control system unites all openGear suppliers: DashBoard for setup, real-time control, monitoring, and tools for creating customized workflow through CustomPanels. The optional Advanced Networking controller from ROSS features DataSafe, which automatically saves and restores settings if a module is swapped.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

Cooling

While many of AJA's openGear cards are energy-efficient, the high-density nature of rackmount cards can generate heat in a small space. Integrated fans in the OG-X-FR keep internal components operating at acceptable temperatures, leading to improved reliability and longer card life. 

OG-X-FR offers more power and cooling for the most demanding UltraHD, 12G SDI & IP workloads.

Smart Power

OG-X-FR accommodates 2 front-loaded, hot-swappable power supplies. Each power supply contains an independent cooling fan, status LED, and a front mounted power switch.

  • Total system power of 600W
  • New high power mode allowing 23W per slot

OG-X-FR ships with a power supply included. When seeking redundancy for extra security in critical environments, order an additional OG-X-PS from your reseller.

OG-X-PS 

US MSRP $865

Easy Access

A fold-down front panel provides you quick access to any of the installed cards for easy maintenance or replacement without having to remove the rack frame or climb behind the rack.

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information