AJA OG-12GM 12G-SDI to/from SDI Muxer/DeMuxer

openGear compatible cardSDI Transport Converter for 12G, 6G, 3G and 1.5G-SDI        Supports single link, dual link, or quad link SDI on inputs and outputs12G-SDI to/from quad link 3G-SDI or dual link 6G-SDI6G-SDI to/from quad link 1.5G-SD or dual link 3G-SDI3G-SDI to/from dual link 1.5G-SDITwo Sample Interleave (2SI) to/from Square Division (Quadrant) pixel mapping3G-SDI Level A to/from 3G-SDI Level B-DLSimple Frame Rate Conversion (FRC)HDR signaling metadata pass-through and optional overridePass-through of Single Link 12G, 6G, 3G, 1.5G and 270M SDI videoDistribution Amplifier support (1×4)Input signal diagnostics and timing analyzer for quad link signalsAutomatic or manual controlDetailed timing analysis for validating alignment of quad link SDI inputsPasses SDI embedded audio, 24-bit, up to 16-ChannelsRemote Ethernet configuration through Ross DashBoard softwarePower: 13 wattsHot-swappableRear I/O card includedTwo slots required for each cardCompatible with OG-X-FR and OG-3-FR openGear framesFive year warranty

Sună pentru preț

(+40) 722 428 874

Adaugă la favorite
Adaugă la favorite
Category:

Ți-a plăcut acest produs? Adaugă-l acum la favorite.

Adaugă la favorite
Adaugă la favorite

Description

Features

  • openGear compatible card
  • SDI Transport Converter for 12G, 6G, 3G and 1.5G-SDI        
  • Supports single link, dual link, or quad link SDI on inputs and outputs
  • 12G-SDI to/from quad link 3G-SDI or dual link 6G-SDI
  • 6G-SDI to/from quad link 1.5G-SD or dual link 3G-SDI
  • 3G-SDI to/from dual link 1.5G-SDI
  • Two Sample Interleave (2SI) to/from Square Division (Quadrant) pixel mapping
  • 3G-SDI Level A to/from 3G-SDI Level B-DL
  • Simple Frame Rate Conversion (FRC)
  • HDR signaling metadata pass-through and optional override
  • Pass-through of Single Link 12G, 6G, 3G, 1.5G and 270M SDI video
  • Distribution Amplifier support (1×4)
  • Input signal diagnostics and timing analyzer for quad link signals
  • Automatic or manual control
  • Detailed timing analysis for validating alignment of quad link SDI inputs
  • Passes SDI embedded audio, 24-bit, up to 16-Channels
  • Remote Ethernet configuration through Ross DashBoard software
  • Power: 13 watts
  • Hot-swappable
  • Rear I/O card included
  • Two slots required for each card
  • Compatible with OG-X-FR and OG-3-FR openGear frames
  • Five year warranty

OG-12GM Workflow Diagram 

This workflow diagram shows a 4K camera system outputting video via a 4x 3G-SDI quad-link connection. This output is connected to the 4x 3G-SDI inputs of the OG-12GM, which converts it in turn into single-link 12G-SDI, shown here with a Ki Pro Ultra 12G recording the video at the end of the signal chain.

 

OG-12GM Workflow Diagram

This workflow diagram shows a 4K camera system outputting video via 1x 12G-SDI connection. This output is connected to the 12G-SDI input of the OG-12GM, which then converts it into quad-link 3G-SDI, here shown with an AJA KUMO 3232 3G-SDI router providing further distribution.

OG-12GM Integration Diagram

This integration workflow diagram shows a 4K camera system outputting video via a 4x 3G-SDI quad-link connection. The OG-12GM provides a conversion from quad-link 3G-SDI into single link 12G-SDI, allowing the 4K 3G-SDI camera source to fit seamlessly into a 4K 12G-SDI eco system. Multiple OG-12GM cards can be housed in the appropriate openGear rackframe, making multi-cam conversions easy. 

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Reviews

There are no reviews yet.

Be the first to review “AJA OG-12GM 12G-SDI to/from SDI Muxer/DeMuxer”

Your email address will not be published. Required fields are marked *


Tech Specs


Video Formats

  • (4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (4K) 4096 x 2160PsF 23.98, 24, 25, 29.97, 30
  • (UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (UltraHD) 3840 x 2160PsF 23.98, 24, 25, 29.97, 30
  • (2K) 2048 x 1080p 50, 59.94, 60
  • (2K) 2048 x 1080PsF 23.98, 24, 25, 29.97, 30
  • (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
  • (HD) 1920 x 1080i 50, 59.94, 60
  • (HD) 1280 x 720p 50, 59.94, 60 
  • (SD) 625i 50
  • (SD) 525i 59.94
  • YCbCr 4:2:2/4:4:4
  • RGB 4:4:4, SMPTE or Full level
  • 10 or 12-bit

 

Note: Raster and Frame Rate Dependent, please see OG-12GM Video Formats in Documents and Manual.


Video Input and Output Digital

  • 4x 12G-SDI BNC, SMPTE 259/292/424/2081/2082
    • Single Link 12G/6G/3G/1.5G-SDI
    • Dual Link 2x6G/2x3G/2x1.5G-SDI
    • Quad Link 4x3G Level A or B Dual Link/4x1.5G-SDI

Supported Conversions and Fuctions

  • Quad 3G-SDI Level A to Single 12G-SDI 
  • Quad 3G-SDI Level B Dual Link to Single 12G-SDI 
  • Single 12G-SDI to Quad 3G-SDI Level A
  • Single 12G-SDI to Quad 3G-SDI Level B Dual Link
  • Quad 3G-SDI Level A to Dual 6G-SDI
  • Quad 3G-SDI Level B Dual Link to Dual 6G-SDI
  • Dual 6G-SDI to Quad 3G-SDI Level A
  • Dual 6G-SDI to Quad 3G-SDI Level B Dual Link
  • Dual 3G-SDI Level A to Single 6G-SDI
  • Dual 3G-SDI Level B Dual Link to Single 6G-SDI
  • Single 6G-SDI to Dual 3G-SDI Level A
  • Single 6G-SDI to Dual 3G-SDI Level B Dual Link
  • Quad 1.5G-SDI to Single 6G-SDI 
  • Single 6G-SDI to Quad 1.5G-SDI 
  • Dual 1.5G-SDI to Single 3G-SDI Level A
  • Dual 1.5G-SDI to Single 3G-SDI Level B Dual Link
  • Single 3G-SDI Level A to Dual 1.5G-SDI
  • Single 3G-SDI Level B Dual Link to Dual 1.5G-SDI
  • Quad 3G-SDI Level A to Quad 3G-SDI Level B Dual Link
  • Quad 3G-SDI Level B Dual Link to Quad 3G-SDI Level A  
  • Two Sample Interleave (2SI) to Square Division (Quadrant) pixel mapping
  • Square Division (Quadrant) to Two Sample Interleave (2SI) pixel mapping
  • HDR VPID pass-through or override for Colorimetry and Transfer Characteristic
  • Pass-through of Single Link 12 Gbps, 6 Gbps, 3 Gbps, 1.5 Gbps, and 270 Mbps SDI video
  • Distribution Amplifier support (1x4)
  • Input signal diagnostics
  • Input timing analyzer for Quad Link signals

Cable Equalization

(Belden 1694A coax)

  • 12 Gbps, 70m
  • 6 Gbps, 100m
  • 3 Gbps, 140m
  • 1.5 Gbps, 200m
  • 270 Mbps, 300m

Audio Input/Output Digital

  • Passes SDI embedded audio, 24-bit, up to 16-channels

User Interface

  • openGear DashBoard network control software via Windows, macOS, or Linux

Size

  • openGear standard form factor, front slot and rear card.
  • Two slots required for each card.

Weight

  • 0.5 lb (0.3 kg)

Power

  • openGear frame compatible, 13.0 watts max per card

Environment

  • Safe Operating Temperature: 0 to 40 C (32 to 104 F)
  • Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: <3,000 meters (<10,000 feet)

Quick Comparison

SettingsAJA OG-12GM 12G-SDI to/from SDI Muxer/DeMuxer removeAJA OG-FiDO-T-MM openGear 1-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter removeAJA OG-FiDO-2T-MM openGear 2-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter removeAJA OG-3GDA-2x4 openGear 2x4 3G-SDI reclocking DA removeAJA OG-ROI-HDMI openGear HDMI to 3G-SDI Scan Converter removeAJA OG-ROI-SDI openGear 3G-SDI to 3G-SDI/HDMI Scan Converter remove
NameAJA OG-12GM 12G-SDI to/from SDI Muxer/DeMuxer removeAJA OG-FiDO-T-MM openGear 1-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter removeAJA OG-FiDO-2T-MM openGear 2-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter removeAJA OG-3GDA-2x4 openGear 2x4 3G-SDI reclocking DA removeAJA OG-ROI-HDMI openGear HDMI to 3G-SDI Scan Converter removeAJA OG-ROI-SDI openGear 3G-SDI to 3G-SDI/HDMI Scan Converter remove
Image
SKU
Rating
Price
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionopenGear compatible cardSDI Transport Converter for 12G, 6G, 3G and 1.5G-SDI        Supports single link, dual link, or quad link SDI on inputs and outputs12G-SDI to/from quad link 3G-SDI or dual link 6G-SDI6G-SDI to/from quad link 1.5G-SD or dual link 3G-SDI3G-SDI to/from dual link 1.5G-SDITwo Sample Interleave (2SI) to/from Square Division (Quadrant) pixel mapping3G-SDI Level A to/from 3G-SDI Level B-DLSimple Frame Rate Conversion (FRC)HDR signaling metadata pass-through and optional overridePass-through of Single Link 12G, 6G, 3G, 1.5G and 270M SDI videoDistribution Amplifier support (1x4)Input signal diagnostics and timing analyzer for quad link signalsAutomatic or manual controlDetailed timing analysis for validating alignment of quad link SDI inputsPasses SDI embedded audio, 24-bit, up to 16-ChannelsRemote Ethernet configuration through Ross DashBoard softwarePower: 13 wattsHot-swappableRear I/O card includedTwo slots required for each cardCompatible with OG-X-FR and OG-3-FR openGear framesFive year warrantyVideo Formats: 150 Mbps - 3 Gbps, format agnosticInputs: 1x 3G-SDI with SDI Loop outOutputs: 1x 3G-SDI BNC Output; 1x Multi-Mode LC Fiber OutputMonitor via openGear DashBoardInput Present and Input SMPTE Lock LEDsAutomatic detection and reclocking270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto SelectNominal Wavelength: 850 nmPower: 2.5 wattsHot swap capableCompatible with OG-X-FR, OG-3-FR and DFR-8321 openGear framesVideo Formats: 150 Mbps - 3 Gbps, format agnosticInputs: 2x 3G-SDI BNCOutputs: 2x Multi-Mode LC FiberMonitor via openGear DashBoardInput Present and Input SMPTE Lock LEDsAutomatic detection and reclocking270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto SelectNominal Wavelength: 850 nmPower: 2.5 wattsHot swap capableCompatible with OG-X-FR, OG-3-FR and DFR-8321 openGear framesVideo Formats: 150 Mbps - 3 Gbps, format agnosticInput: 1x 3G-SDI BNC (1x8 mode); 2x 3G-SDI BNC (2x4 mode)Outputs: 8x 3G-SDI BNC4 outputs noninverting (1x8 mode)2 outputs noninverting (2x4 mode)Support for HDR – High Dynamic Range videoMonitor via openGear DashBoardPasses embedded audio, all ancillary data including closed caption and time codeInput Present and Input SMPTE Lock LEDsAutomatic input equalization and output reclocking270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto SelectPower: 2.6 watts max per cardHot swappableCompatible with OG-X-FR, OG-3-FR and DFR-8321 openGear framesopenGear compatible cardComputer resolutions to video resolutions Scan ConverterHDMI to 3G-SDI conversion with HDMI loop throughEDID Emulation3G-SDI outputSupports SD, HD, and 3G formats (see Tech Specs for complete list)Region of Interest scalingUp, down, cross-conversionAspect ratio conversionFrame rate conversionImage H/V flip and 90 degree rotationConversion between Deinterlaced and Progressive signalsAccepts input HDMI formats up to 1920 x 1200 60 HzLoss of input management: Black or MuteSupports 8-channels of embedded audioAudio input via 3-pin analog connectors or 8-channel HDMI embedded audioGenlock:  Reference Input, HDMI Input, or Free RunRemote Ethernet configuration through Ross DashBoard softwarePower: 8 wattsHot-swappableRear I/O card includedTwo slots required for each cardCompatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear framesFive year warrantyopenGear compatible cardSDI to HDMI/3G-SDI conversion with SDI loop throughScan Converter3G-SDI and HDMI 1.4 outputsSupports SD, HD, and 3G formats (see Tech Specs for complete list)Region of Interest scalingUp, down, cross-conversionAspect ratio conversionFrame rate conversionImage H/V flip and 90 degree rotationConversion between Deinterlaced and Progressive signalsAccepts input SDI formats up to 1920 x 1080p 60 HzLoss of input management: Black or MuteSupports 8-channels of embedded audio2-channel analog audio output of disembedded audioGenlock:  Reference Input, SDI Input, or Free RunRemote Ethernet configuration through Ross DashBoard softwarePower: 7 wattsHot-swappableRear I/O card includedTwo slots required for each cardCompatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear framesFive year warranty
Content

Features

  • openGear compatible card
  • SDI Transport Converter for 12G, 6G, 3G and 1.5G-SDI        
  • Supports single link, dual link, or quad link SDI on inputs and outputs
  • 12G-SDI to/from quad link 3G-SDI or dual link 6G-SDI
  • 6G-SDI to/from quad link 1.5G-SD or dual link 3G-SDI
  • 3G-SDI to/from dual link 1.5G-SDI
  • Two Sample Interleave (2SI) to/from Square Division (Quadrant) pixel mapping
  • 3G-SDI Level A to/from 3G-SDI Level B-DL
  • Simple Frame Rate Conversion (FRC)
  • HDR signaling metadata pass-through and optional override
  • Pass-through of Single Link 12G, 6G, 3G, 1.5G and 270M SDI video
  • Distribution Amplifier support (1x4)
  • Input signal diagnostics and timing analyzer for quad link signals
  • Automatic or manual control
  • Detailed timing analysis for validating alignment of quad link SDI inputs
  • Passes SDI embedded audio, 24-bit, up to 16-Channels
  • Remote Ethernet configuration through Ross DashBoard software
  • Power: 13 watts
  • Hot-swappable
  • Rear I/O card included
  • Two slots required for each card
  • Compatible with OG-X-FR and OG-3-FR openGear frames
  • Five year warranty

OG-12GM Workflow Diagram 

This workflow diagram shows a 4K camera system outputting video via a 4x 3G-SDI quad-link connection. This output is connected to the 4x 3G-SDI inputs of the OG-12GM, which converts it in turn into single-link 12G-SDI, shown here with a Ki Pro Ultra 12G recording the video at the end of the signal chain.

 

OG-12GM Workflow Diagram

This workflow diagram shows a 4K camera system outputting video via 1x 12G-SDI connection. This output is connected to the 12G-SDI input of the OG-12GM, which then converts it into quad-link 3G-SDI, here shown with an AJA KUMO 3232 3G-SDI router providing further distribution.

OG-12GM Integration Diagram

This integration workflow diagram shows a 4K camera system outputting video via a 4x 3G-SDI quad-link connection. The OG-12GM provides a conversion from quad-link 3G-SDI into single link 12G-SDI, allowing the 4K 3G-SDI camera source to fit seamlessly into a 4K 12G-SDI eco system. Multiple OG-12GM cards can be housed in the appropriate openGear rackframe, making multi-cam conversions easy. 

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features

  • Video Formats: 150 Mbps - 3 Gbps, format agnostic
  • Inputs: 1x 3G-SDI with SDI Loop out
  • Outputs: 1x 3G-SDI BNC Output; 1x Multi-Mode LC Fiber Output
  • Monitor via openGear DashBoard
  • Input Present and Input SMPTE Lock LEDs
  • Automatic detection and reclocking
  • 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
  • Nominal Wavelength: 850 nm
  • Power: 2.5 watts
  • Hot swap capable
  • Compatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames

Connectivity

The 3G-SDI input is reclocked with best in class input jitter tolerance. A reclocked looping 3G-SDI output is also provided. 3G-SDI rates of 270Mb, 1.5Gb, and 3Gb are supported. Supports Multi-Mode fiber cable.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features

  • Video Formats: 150 Mbps - 3 Gbps, format agnostic
  • Inputs: 2x 3G-SDI BNC
  • Outputs: 2x Multi-Mode LC Fiber
  • Monitor via openGear DashBoard
  • Input Present and Input SMPTE Lock LEDs
  • Automatic detection and reclocking
  • 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
  • Nominal Wavelength: 850 nm
  • Power: 2.5 watts
  • Hot swap capable
  • Compatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames

Connectivity

The 3G-SDI inputs are reclocked with best in class input jitter tolerance. 3G-SDI rates of 270Mb, 1.5Gb, and 3Gb are supported. The fiber connector is attached to the main card for added reliability and cost savings.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features

  • Video Formats: 150 Mbps - 3 Gbps, format agnostic
  • Input: 1x 3G-SDI BNC (1x8 mode); 2x 3G-SDI BNC (2x4 mode)
  • Outputs: 8x 3G-SDI BNC
    • 4 outputs noninverting (1x8 mode)
    • 2 outputs noninverting (2x4 mode)
  • Support for HDR – High Dynamic Range video
  • Monitor via openGear DashBoard
  • Passes embedded audio, all ancillary data including closed caption and time code
  • Input Present and Input SMPTE Lock LEDs
  • Automatic input equalization and output reclocking
  • 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
  • Power: 2.6 watts max per card
  • Hot swappable
  • Compatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames

Connectivity

The 3G-SDI inputs are automatically equalized and the output(s) is automatically reclocked with best in class input jitter tolerance. SDI rates of 270Mb, 1.5Gb, and 3Gb are supported. Two SDIs inputs and eight SDI outputs are provided. A 10x BNC rear openGear connector module is included.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features

  • openGear compatible card
  • Computer resolutions to video resolutions Scan Converter
  • HDMI to 3G-SDI conversion with HDMI loop through
  • EDID Emulation
  • 3G-SDI output
  • Supports SD, HD, and 3G formats (see Tech Specs for complete list)
  • Region of Interest scaling
  • Up, down, cross-conversion
  • Aspect ratio conversion
  • Frame rate conversion
  • Image H/V flip and 90 degree rotation
  • Conversion between Deinterlaced and Progressive signals
  • Accepts input HDMI formats up to 1920 x 1200 60 Hz
  • Loss of input management: Black or Mute
  • Supports 8-channels of embedded audio
  • Audio input via 3-pin analog connectors or 8-channel HDMI embedded audio
  • Genlock:  Reference Input, HDMI Input, or Free Run
  • Remote Ethernet configuration through Ross DashBoard software
  • Power: 8 watts
  • Hot-swappable
  • Rear I/O card included
  • Two slots required for each card
  • Compatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear frames
  • Five year warranty

Region of Interest

Eliminate extra interface clutter and menu bars and extract only the portion of the computer screen you want.

OG-ROI-HDMI is fully compatible with the free Ross DashBoard application, offering interactive selection of a Region of Interest from the incoming computer signal. You have full control over how that region is scaled to the output resolution using AJA’s high quality scaling algorithms for the cleanest picture quality possible. 

Take full control of aspect ratio, image rotation and frame rate conversion with on-screen controls in the DashBoard software that shows you what your source and output will look like, including the formats that are coming in and the choices you have made for the signal going out.

openGear ROI Video Wall Workflow

It is also possible to expand output options and create a large, synchronized video wall display. The workflow diagram shows 9 x OG-ROI-HDMI utilized in a rackframe to produce a video wall of 9 SDI monitors. Control over each OG-ROI-HDMI is provided via ethernet to the DashBoard. Each computer source is connected to an OG-ROI-HDMI input with the region of interest output via SDI. Simple controls and connectivity for the OG-ROI-HDMI can be used to create sophisticated and complex video wall presentations. 

openGear ROI Window Wall Workflow

You're able to easily create highly effective and engaging displays by using additional OG-ROI-HDMI openGear converters. By utilizing three OG-ROI-HDMI openGear converters in the appropriate rackframe you can feed three display monitors side by side, each rotated to portrait mode. By using the HDMI pass through of the OG-ROI-HDMI, the HDMI routed image is in sync, with each OG-ROI-HDMI providing the necessary region of interest output via SDI. Settings for each of the OG-ROI-HDMI openGear converters is provided via ethernet control through an ethernet switch. The result is a visually exciting and creative way to feed display content.

Audio

OG-ROI-HDMI accepts 2-channel analog audio from the 2x 3-pin terminal blocks connectors or embedded 8-channel audio from an HDMI input. The audio source and routing can be selected in the DashBoard software and is embedded into the SDI output. This allows computer audio to be embedded within the SDI signal for easy, synchronized routing.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

Features

  • openGear compatible card
  • SDI to HDMI/3G-SDI conversion with SDI loop through
  • Scan Converter
  • 3G-SDI and HDMI 1.4 outputs
  • Supports SD, HD, and 3G formats (see Tech Specs for complete list)
  • Region of Interest scaling
  • Up, down, cross-conversion
  • Aspect ratio conversion
  • Frame rate conversion
  • Image H/V flip and 90 degree rotation
  • Conversion between Deinterlaced and Progressive signals
  • Accepts input SDI formats up to 1920 x 1080p 60 Hz
  • Loss of input management: Black or Mute
  • Supports 8-channels of embedded audio
  • 2-channel analog audio output of disembedded audio
  • Genlock:  Reference Input, SDI Input, or Free Run
  • Remote Ethernet configuration through Ross DashBoard software
  • Power: 7 watts
  • Hot-swappable
  • Rear I/O card included
  • Two slots required for each card
  • Compatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear frames
  • Five year warranty

Region of Interest

Eliminate extra interface clutter and menu bars and extract only the portion of the computer screen you want.

OG-ROI-SDI is fully compatible with the free Ross DashBoard application, offering interactive selection of a Region of Interest from the incoming computer signal. You have full control over how that region is scaled to the output resolution using AJA’s high quality scaling algorithms for the cleanest picture quality possible. 

Take full control of aspect ratio, image rotation and frame rate conversion with on-screen controls in the DashBoard software that shows you what your source and output will look like, including the formats that are coming in and the choices you have made for the signal going out.

openGear ROI Window Wall Workflow

You're able to easily create highly effective and engaging displays by using additional OG-ROI-SDI openGear converters. By utilizing three OG-ROI-SDI openGear converters in the appropriate rackframe you can feed three display monitors side by side, each rotated to portrait mode. By using the SDI pass through of the OG-ROI-SDI, the SDI routed image is in sync, with each OG-ROI-SDI providing the necessary Region of Interest output via SDI. Settings for each of the OG-ROI-SDI openGear converters is provided via ethernet control through an ethernet switch. The result is a visually exciting and creative way to feed display content.

Audio

OG-ROI-SDI accepts 2-channel analog audio from the 2x 3-pin terminal blocks connectors or embedded 8-channel audio from an SDI input. The audio source and routing can be selected in the DashBoard software and is embedded into the SDI output. This allows computer audio to be embedded within the SDI signal for easy, synchronized routing.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The modular rear panel allows custom I/O connections per card (included with individual cards).

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

DashBoard Software

DashBoard software offers quick and convenient configuration and control of openGear cards on macOS, Windows, and Linux.

AJA Mini-Matrix

Information on the complete line of AJA Rackframes and cards are now available in the Mini-Matrix mobile app on iOS. AJA products are extensive and this app helps you find the right converter for any situation, wherever you are.

Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the .

Industry Leading Support

AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your openGear installation, configuration, operation or encounter any technical issue,   will work with you to get up and running.

openGear products are covered by a generous five year warranty.  Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.

WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information